The Soteria Optical/Heat Multisensor Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat. It can be switched to detect smoke, heat or a combination of both offering greater flexibility. … Luk

All detectors in the Soteria®, Discovery® and XP95® range fit into the XPERT 8 Intelligent Mounting Base. The base has a wide interior diameter for ease of access to cables and terminals. The ‘E-Z Fit’ feature allows you to fit the base screws, place the XPERT 8 Intelligent Mounting Base over the screws, slide it into place and tighten the screws. The detector requires a clockwise rotation into the base for fitting. Additionally the detector can be locked into the base for increased security, by a grubscrew using a 1.5mm hexagonal driver. The XPERT 8 card, Part Number 38532-064, supplied with the base, has pre-punched pips to remove to set the address. Refer to the XPERT 8 Intelligent Mounting Base Installation Guide 39215-005 for details on how to set the address. … Luk

The Soteria Heat Detector features two heat sensors located laterally to ensure accurate heat detection in all orientations … Luk

The Soteria Optical Smoke Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber. PureLight marks a new stage in the development of Apollo optical technology and aims to reduce the possibility of false alarms whilst increasing the reliability of detection of a real fire. … Luk

The Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signals to the Control and Indicating Equipment using an interrupt feature within the Apollo Digital Protocol. An alarm status is indicated through the rotation of the resettable element, displaying yellow and black indication bars and a solid red LED. The manual call point can be easily reset from the front using the supplied reset key. … Luk

Anvendes for udgangssignal for bl.a. ABDL - døre og relæstyring

• Indbygget isolationsled
• IP 54
• Dimensioner ( bx h x d ) : 150 x 60 x 83 mm
• Godkendelse EN 54-17, EN 54-18

… Luk

Anvendes for udgangssignal for bl.a. ABDL - døre og relæstyring

• Indbygget isolationsled
• Output 1A / 30 V - 1 input
• IP 54
• Dimensioner ( b x h x d ) : 150 x 55 x 90 mm
• Godkendelse 0832 - CPR-F1316

… Luk

I/O enhed med 3 relæer. Anvendes for udgangssignal for bl.a. ABDL-døre og relæstyring … Luk